Embossed Business Cards
Stand out from the crowd
Take your business cards to the next level with embossing! The raised impression of embossing adds class and finesse to your design. Not only is it a truly eye-catching effect, but will make an impact through the raised texture of the business card itself.
Embossing makes elements of your business card literally stand out, raising areas of one side of the card as specified in your design. The opposite effect, having an impression on one side of the card is called Debossing.
A unique aspect of this printing technique is that you cannot have one effect without the other also being applied to the card. An embossed design will create a reverse impression, deboss, on the back side, while a debossed design will create a reverse raised effect, emboss, on the other side.
Embossed Business Card Inspiration
High Mountain Prep Business cards produced with 2 Color Letterpress & Deboss
40PT Bright White Cotton
- 20pt Bright White Cotton
- Standard - 3.5" x 2"
- Letterpress, Debossing
CAnnabis Futurists business cards produced on cotton with blind embossing
- 12pt Uncoated
- Standard - 3.5" x 2"
- Foiling, Embossing
Pocky business cards with Embossed red foil
Peter R. Stevens business card produced with 3d embossed on 900gsm
Blind Debossing on Jet Black
- 16pt Jet Black
- Standard - 3.5" x 2"
Laura Zastrow Business Cards with Blind Embossing on Jet Black
Embossed Business Card Pricing
- Popular FAQ
- Download Template
- Design Guidelines
Most Popular Questions
We can emboss a wide range of stocks and materials. The best stocks for embossing are soft uncoated stocks (such as our 20pt Cotton) or for fine detail embossing, uncoated stocks 16pt or less.
If there is a specific stock you are interested in embossing, please request a Print Quote and one of our Estimators will get in touch with you.
Below are examples of materials we have embossed:
16pt Pearl Silver
16pt Jet Black
16pt Smooth Matte Laminate with Spot UV
16pt Smooth Matte Laminate
What are the Best Cards for Embossing and Debossing?
Thinner and softer cardstocks show the detail of an emboss or deboss much better than thicker rigid stocks. Uncoated stocks also generally hold these details better.
That being said, greater depth of the raised area or impression can be produced with thicker soft stocks, like 40pt Cotton. Since the thickness will make fine details less visible, the design should be made more simple and bold with less fine detail.
Thicker coated stocks will not be as suitable for fine detail or deep impressions, therefore the design for these stocks should be created with this in mind.
If you would like to print a design on the back or have an emboss on the back side as well as the front, we recommend a 2-ply layered card. This means the card will be embossed then mounted to another card which will be printed or embossed with your design for the back side. The reverse impression of the emboss will then be hidden inside the two layers so there is no interference with the design on the opposite side.
We do recommend coated stocks for 2-ply embossed or debossed orders, since the emboss / deboss is less likely to be damaged when the cards are mounted than it will be with uncoated stocks. Please note that there are strict design considerations for these projects that one of our print specialists will need to review with you first. You can speak to one by requesting a Print Quote.
See: 2-ply Cards.
What is the difference between Embossing and 3D Embossing?
3D Embossing is a specialty type of embossing. Standard embossing offers one level of impression; with 3D Embossing the indent can be sculpted and gradated, with different levels and shapes.
Standard/regular embossing. One level of impression.
3D Embossing has a higher cost than standard Embossing, as it one of our most specialized print services and most expensive options.
Please note our 3D Emboss technique does not allow for a 2-ply card in combination with this process. There cannot be any design or print on the back side of a 3D Embossed card, and you cannot hide the impression visible on the back side of the card.
2-ply options are available for regular Embossing only. You can also print on the back side of a 1-ply order that includes a regular Emboss.
Setting up press-ready files for Embossing
Emboss print-ready files should be supplied as separations. Before you create a press-ready file for your design, be sure to carefully read through Design Considerations for Embossing.
This means the emboss layer is supplied in a separate file (or separate page) of your press-ready PDF file.
For 3D embossing you will also need to provide a text file (exported as a PDF file) including a description of how you would like the 3D elements produced.
Finest Detail for Embossing
Fine detail refers to the line weight used in your artwork, and includes the small dots and serifs on fonts.
Fine Detail According to Stock
The finest detail for embossing is largely dependent on the paper stock – thinner uncoated stocks hold fine detail when embossed the best, while thicker rigid or coated stocks do not hold fine detail as well.
The thickness of the paper as well as the rigidity will affect how fine of detail is suitable in your design. We offer a very wide range of stocks, each of which may affect the way your embossed detail turns out. As such we do not recommend to place an embossed order "run-as-is" unless it is a repeat order. Choosing the "online PDF proof" option before production will give you the benefit of our Prepress Team's review of your files - they may make recommendations to change your design to better suit your chosen stock. If you are ordering a custom job please make sure you upload files with your quote request so an Estimator can let you know if they think the chosen paper stock will not be suitable.
Fine detail can be as small as 1pt on soft uncoated stocks 16pt or thinner. Coated stocks and thicker uncoated stocks can be more rigid and will have lower tolerances for embossing, meaning details in the design will need to be larger.
Line Weight and Embossing
Although increasing your line weight may make the design look thicker than desired, it is important to keep in mind that the embossed effect is visually thinning due to the curved surface of the emboss. Embossed artwork appears thinner than it does when viewed as a flat design. We recommend to choose sans-serif fonts as the font size will not need to be increased as much to meet the minimum line weight as it would with serif fonts.
1pt is our minimum recommended line weight, with a few points to consider:
- if your design is to be blind embossed (not registered to ink printing) it is highly recommended to use a thicker line weight, since the effect of a blind emboss is much more subtle. Small embossed text registered to ink printing can still be readable while this same text created in a blind emboss may not be legible.
- Spacing between printed elements should also be kept at a minimum 1pt.
- If you're using negative space for your artwork, the minimum recommended line weight is increased to 2pt.
- The finer the detail in your artwork, the less precise the registration of ink printing to embossing will be. 2pt line weight or higher generally has better results for registered embossed designs.
The larger you can make details in the artwork for embossing, the more impact it will have, so we do not recommend a large amount of fine detail.
What is the depth of an Emboss?
The depth of an Emboss largely depends on the type of stock (its elasticity and structure) and typically ranges between 0.5 – 2 millimetres. A 3D Emboss impression can be up to 0.2 inches (restrictions apply).
Note that due to many factors and variations in production, the depth of an emboss cannot be guaranteed.
What is the difference between Blind and Registered Embossing?
|The embossed element is not printed with ink. The emboss is not aligned to any graphics.|
The embossed element is printed first, and then embossed in alignment to the printed element.
The embossed element is printed in Spot UV, and then embossed in alignment to the Spot UV.
Debossing is the opposite embossing and can be categorised in the same way: Blind Debossing and Registered Debossing.
Since a blind deboss or emboss will have a much more subtle effect than it does when registered to a printed image, blind embossing is not as suitable for fine details, especially small text.
Will an emboss / deboss show through to the back of a card?
The back side of a card will be affected by both embossing and debossing processes.
Embossing will show a reverse impression on the opposite side of the stock (deboss), while debossing will show a reverse raised design on the opposite side of the stock (emboss). This is important when embossing or debossing text, as it will only be forward reading on one side of the card. See image below depicting an embossed design for text. The back side of the card shows an opposite debossed effect.
To avoid the back of the stock being affected, you can order a Layered card (2PLY) that will hide the opposite effect of the debossing or embossing inside two cards that are mounted together.
Please note that "blind letterpress" is a different process that is used to create an impression and although it is similar to a deboss, it has a more subtle effect and will not create an emboss on the opposite side. "Show through" with this process will still be visible, but the level will be dependent on the thickness of the card (for example, the "show through" will be less on a thicker/stronger stock).
Below is an example of a 3D emboss with letterpress. The 3D embossed area (deer) shows an opposite impression (deboss) on the back side of the card. The letterpress, both printed (Lord Fern text) and blind (background pattern) can only be seen subtly on the back side and does not create an opposite emboss.
Have a question? Ask Away!
Select Business Card Template:
Select File Format:
- Bleed Area
- Trim Area
- Safe Area
Bleed Area refers to images that extend to the very edges of a design. To prevent an unwanted white border from showing at the edge of your design, or for the design to appear slightly off-center, be sure to extend any background colors or design elements all the way to the edge of bleed (.125” past the trim on all four sides).
Trim Area refers to the amount of the image that will appear on your finished product. These areas will also be marked with ‘cut lines’ on your proof and are where we aim to cut your card.
Safety Area in most cases refers to 1/8 of an inch inside of the Trim Area. For thicker papers 20pt and up or wooden papers the Safety Area increases ¼ of an inch inside the Trim Area. we strongly recommend you keep important aspects of your design such as text and logos well inside of the Safety Area, otherwise, they may be cut off.